USD - US Dollar (Change)

NOTICE: Due to VERY high order volumes, please allow at least one week for your order to ship. If you have sent us an email, it will take additional time to respond. Have patience; we are working 27/4 to get your orders out the door. If you ordered sunnysky motors, yours have been reserved and will be sent soon. Thank you.


My Cart (0)

Flip MWC Flight Controller 1.5

SKU# 3454333333

Be the first to review this product

Availability: In stock

$15.00

Quick Overview




This Flight control board designed for open source project "Multiwii", it has 6DOF sensor, supports:


- All MWC Firmwares,High extend capacity
- Y3,Y4,+4,X4,6,X6,Y6 Flying Mode, 8 and X8 mode available when using S-PPM receiver. - 6 input channels for standard receiver and S-PPM receiver
- Up to 8-axis motor output (have to use S-PPM Receiver)
- 2 Servo output for camera (only available when using 4 motor or less)
- 2 status LED
- 1x serial port for bluetooth.
- On board Micro USB port,never look for your FTDI module again!
- I2C socket for extend sensor,I2C LCD/OLED display or any I2C devices
- Separate 3.3V and 5V LDO voltage regulators 


Preloade with Quad X





Sensor type: #define FLYDUINO_MPU // USE USB PORT AS FRONT 





 






Click on image to zoom

Details
Named after the main project "The Flip", a quad built to take all the
abuse of acrobatic experts or learning acrobatics to newb pilots
just building up their "stick-time". There is no real substitute for
"flight-time" so this flight controller was designed to be the first one
you will ever want to flip on purpose. 
Affordable, small, light-weight and up-to-date sensors with USB
It was made for readytoflyquads.com and the RTF Flip Quad
package, but we also want to offer this game changing flight
controller to everyone. 

Sensors :

  • ATmega328
  • MPU6050 (Inversense)  6 axis gyro/accelerometer
  • with Motion Processing Unit 
  • CP2102 ( USB to UART Data Transfer)

Acro and Self-Level modes; 2 Aux inputs

- All MWC Firmwares, High extend capacity
- Y3,Y4,+4,X4,6,X6,Y6 flying modes, 8 and X8 mode
w/ S-PPM receiver
- Up to 8-axis motor output (have to use S-PPM RX)
- 2 Servo output for camera (only available when using
4 motor or less)
- 2 status LED
- 1x serial port for bluetooth.
- On board Micro USB port,never look a FTDI module again!
- I2C socket for extend sensor,I2C LCD/OLED display or any
I2C devices
- Separate 3.3V and 5V LDO voltage regulators 

Pre-loaded with Quad X - MINThrottle/1220 - Motor stop =yes

Small innovative 36mmx36mm board size

Sensor type: #define FLYDUINO_MPU //

USE USB PORT AS FRONT 

The price does not  judge the awsome performance!

Get all the firmware, stick commands, drivers, documents,

arduino1.0.3, Everything you need to fly in one place!

MWC 2.3 https://www.dropbox.com/sh/3ptxpwesovd7tx3/gYdZU3lXQh

MWC 2.2:https://www.dropbox.com/sh/x7evvwk3zm3b2ni/a4u4XtFNPW

MWC-S V1.5

$15.00

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.